Wuzstar Outboard Motor, 2 Stroke 18 246cc Long Shaft Boat Engine Aluminum Alloy Fishing Boat Motor w/ Water Cooling System

Application： This outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery,aquaculture,     outdoor exploration, etc.   Details： ● Three-blade Propeller: The three-blades propeller with a streamlined design provides you with greater power. ● Silencer Cover: The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material, thus providing a quieter working environment.     ● Anti-swirl Plate: The anti-swirl plate can effectively reduce the turbulence of the waves and avoid water-wetting clothes.     Gear Oil Filling Method： There is a screw on the gearbox, unscrew the screw to add gear oil. Gear oil is not filled before each machine leaves the factory, so please fill gear oil when using for the first time.. After that, add according to personal use, and check every ten hours.    Notes： 1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil. 2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1. 3. After the running-in period, the volume ratio of gasoline and oil is 50:1. 4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank. 5. The outboard motor must be started in water, do not start the engine on shore. 6. Loosen the vent screw on the fuel tank cover counterclockwise when starting. 7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt. 8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator. 9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months. 10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.